AL600ULMR multi-output access control power supply/charger is specifically designed for use with access control systems and accessories. This unit converts a 115 VAC, 60 Hz input into five individually protected Class 2 Rated power limited 12 VDC or 24 VDC outputs. Each output will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. These outputs will operate in both Fail-Safe and Fail-Secure modes. Controlled trigger input is achieved through normally open (N.O.) or normally closed (N.C.) supervised input or the polarity reversal from an FACP (Fire Alarm Control Panel). A form "C" dry output relay enables HVAC Shutdown, Elevator Recall or it may be used to trigger auxiliary devices.
Altronix AL600ULMR - Power adapter (wall mountable) - AC 115 V - output connectors: 5
General
Device Type:
Power adapter - wall mountable
Power Device
Supported Battery Technology:
Lead acid, gel
Input Voltage:
AC 115 V
Frequency Required:
60 Hz
Power Output Connectors Details:
5 x power
Output Voltage:
DC 12 / 24 V
Max Electric Current:
6 A
Circuit Protection:
Fuse
Miscellaneous
Features:
For indoor use, built-in battery charger, short-circuit protection, thermal protection
Compliant Standards:
UL, cUL, RoHS, UL 294, CSA 22.2 No. 205, MEA, UL 1481