Ruckus ICX 7250-24P (Voltage: AC 120/230 V (50/60 Hz)) main image Roll over main image to zoom in. Click to open expanded view.
Ruckus ICX 7250-24P (Voltage: AC 120/230 V (50/60 Hz)) - Image 1: Main

Ruckus ICX 7250-24P - Switch - L3 - managed - 24 x 10/100/1000 (PoE+) + 8 x 1 Gigabit Ethernet SFP+ - front and side to back - rack-mountable - PoE+ (360 W) (Voltage: AC 120/230 V (50/60 Hz))



Call for availability   (888) 912-3151









This product is on backorder. Compare similar products?

The Ruckus ICX 7250 delivers stand-out performance and flexibility, and SDN readiness that cost-effectively scales as demands grow and advanced technologies emerge. Designed for small to medium-size enterprise, branch offices, and distributed campuses at an affordable cost, these edge switches deliver enterprise functionality without compromising performance and reliability.

Ruckus ICX 7250-24P - Switch - L3 - managed - 24 x 10/100/1000 (PoE+) + 8 x 1 Gigabit Ethernet SFP+ - front and side to back - rack-mountable - PoE+ (360 W) (Voltage: AC 120/230 V (50/60 Hz))
Device Type:
  • Switch - 24 ports - L3 - managed - stackable
Enclosure Type:
  • Front and side to back rack-mountable 1U
  • Gigabit Ethernet
  • 24 x 10/100/1000 (PoE+) + 8 x 1 Gigabit Ethernet SFP+
Power Over Ethernet (PoE):
  • PoE+
PoE Budget:
  • 360 W
  • Switching capacity: 208 Gbps
  • Forwarding performance: 154 Mpps
  • Stacking bandwidth: 80 Gbps
  • Latency: 1.5 µs
  • Virtual interfaces (VLANs): 4095
  • Spanning Tree Protocol instances: 254
  • QoS hardware queues: 8
MAC Address Table Size:
  • 16000 entries
Jumbo Frame Support:
  • 9216 bytes
Max Units In A Stack:
  • 12
Routing Protocol:
  • IGMPv2, IGMP, VRRP, IGMPv3, static IPv4 routing, static IPv6 routing, ECMP, MLDv2, MLD
Remote Management Protocol:
  • SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, CLI
Encryption Algorithm:
  • AES
Authentication Method:
  • RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP)
  • Flow control, BOOTP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DoS attack prevention, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, MAC address filtering, IPv6 support, High Availability, Link Fault Signaling (LFS), Metro Ring Protocol (MRP) support, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Per-VLAN Spanning Tree (PVST), Remote Fault Notification (RFN), Virtual Switch Redundancy Protocol (VSRP) support, VLAN Stacking, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, MLD snooping, Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), STP Root Guard, Uni-Directional Link Detection (UDLD), IPv4 support, LACP support, DHCP relay, Port Security, Per-VLAN Rapid Spanning Tree (PVRST), Energy Efficient Ethernet, Management Information Base (MIB), Strict Priority (SP), tagged VLAN, IGMP proxy, 802.1x authentication, GARP VLAN Registration Protocol (GVRP), Type of Service (ToS), DiffServ Code Point (DSCP) support, OpenFlow support
Compliant Standards:
  • IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1v, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.3az
Expansion / Connectivity
  • 24 x 1000Base-T RJ-45 12 ports (PoE+) / 24 ports (PoE)
  • 8 x Gigabit LAN SFP+ upgradable to 10G
  • 1 x 1000Base-T RJ-45 management
  • 1 x mini-USB Type B management
  • 1 x USB Type A
Power Device:
  • Internal power supply
Power Redundancy:
  • Optional
Power Provided:
  • 525 Watt
Voltage Required:
  • AC 120/230 V (50/60 Hz)
Power Consumption Operational:
  • 73 Watt
  • Redundant Power System (RPS) connector
  • 429,209 hours
Compliant Standards:
  • CISPR 22 Class A, EN 61000-3-2, ICES-003, EN 61000-3-3, EN55024, EN55022 Class A, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, EN 61000-4-8, UL 60950-1 Second Edition, WEEE, IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, RoHS, EN 61000-6-3, FCC Part 15 A, EN 60825-1, CAN/CSA C22.2 No. 60950-1-07, EN 60825-2, EN 60950-1 Second Edition, VCCI Class A, EN 60950-1:2006
Software / System Requirements
OS Required:
  • IBM AIX, SunSoft Solaris, HP-UX, Microsoft Windows
Dimensions & Weight
  • 17.3 in
  • 11 in
  • 1.7 in
  • 10.43 lbs
Manufacturer Warranty
Service & Support:
  • Limited warranty - lifetime
  • Technical support - 3 years
Environmental Parameters
Min Operating Temperature:
  • 23 °F
Max Operating Temperature:
  • 122 °F
Humidity Range Operating:
  • 5 - 95% (non-condensing)
Min Storage Temperature:
  • -13 °F
Max Storage Temperature:
  • 158 °F
Humidity Range Storage:
  • 0 - 95% (non-condensing)
  • Premium performance in an entry-level switch
    The Brocade ICX 7250 Switch provides enterprise-class stackable LAN switching solutions to meet the growing demands of campus networks. Designed for small to medium-size enterprises, branch offices, and distributed campuses, these intelligent, scalable edge switches deliver enterprise-class functionality at an affordable price - without compromising performance and reliability. The Brocade Switch Port Extender technology extends the capabilities of the Brocade HyperEdge Architecture while maximizing the value of Brocade ICX 7250 Switches. It enables the Brocade ICX 7250 to extend ports in combination with Brocade ICX 7450 and 7750 Switches, creating a complete campus network solution with consolidated management across aggregation and core layers, shared network services - adding advanced Layer 3 capabilities to all switches - and scaleout flexibility to expand port density as needed. The Brocade ICX 7250 with Switch Port Extender provides an ideal network access solution for the campus network.
  • Scaling out ports and services as demand grows
    The Brocade ICX 7250 is easy to deploy, manage, and integrate into both new and existing networks. Organizations can buy only what they need today, and easily scale out as demand grows and new technologies emerge. Brocade stacking technology makes it easy to scale ports by stacking up to 12 Brocade ICX 7250 Switches into a single logical switch. This allows the Brocade ICX 7250 to provide a class-leading 80 Gbps of backplane bandwidth as well as simple and robust expandability for future growth at the network edge. In addition, this stacked switch has only a single IP address to simplify management and offers transparent forwarding across a pool of up to 576×1 GbE ports and 96×10 GbE ports. When new switches join the stack, they automatically inherit the stack's existing configuration file, enabling true plug-and-play network expansion. Flexible licensing of 1 GbE to 10 GbE ports, for uplink and stacking, allows organizations to optimize network performance based on specific requirements. Furthermore, Brocade Switch Port Extender technology enables organizations to add advanced Layer 3 services across the stack by simply adding premium Brocade ICX 7750 Switches to existing Brocade ICX 7250 deployments. This eliminates the need for "rip and replace" upgrades, since low-cost Brocade ICX 7250 ports can live on to inherit new services.
  • Switch Port Extender technology: extending options and scalability
    Brocade Switch Port Extender technology, offered for Brocade ICX 7250, 7450, and 7750 Switches, extends network options and scalability. It integrates premium Brocade ICX 7750, midrange Brocade ICX 7450, and entry-level Brocade ICX 7250 Switches, collapsing network access, aggregation, and core layers into a single HyperEdge domain. This domain shares network services while reducing management touch points and network hops through a single-layer design spanning the entire campus network. These powerful deployments deliver equivalent or better functionality than large, rigid modular chassis systems, but with significantly lower costs and smaller carbon footprints. Brocade ICX switches support Distributed Chassis deployment models that use standards-based optics and cabling interface connections to help ensure maximum distance between campus switches - up to 80 km - and minimum cabling costs - up to 50 percent less than incumbent solutions. This gives organizations the flexibility to deliver ports wherever they are needed on campus at a fraction of the cost. The Distributed Chassis design future-proofs campus networks by allowing networks to easily and cost-effectively expand in scale and capabilities.

No Reviews are available at this time

S15108971 CommScope ICX7250-24P 000000000000 Ruckus ICX 7250-24P (Voltage: AC 120/230 V (50/60 Hz)) new
2628.99 USD OutOfStock
Facebook icon Twitter icon YouTube icon Pinterest icon Instagram icon LinkedIn icon
©2000-2021 Howard Technology Solutions, a division of Howard Industries, Inc.
Discover Visa PayPal MasterCard American Express