The Ruckus ICX 7150 combines enterprise-class switching features with high performance at entry-level price. The switch can operate in fanless mode outside of the wiring closet to provide silent operation for classrooms, hospitality suites, retail sites, hospitals or other noise sensitive environments. The ICX 7150-48ZP offers 16 Multigigabit ports, each with PoH up to 90 watts, plus 32 10/100/1000 Mbps ports with PoE+. The switch supports stack-level high availability and stack level ISSU to ensure service resiliency and business continuity.
Ruckus ICX 7150-48ZP - Z-Series - switch - managed - 16 x 100/1000/2.5G (PoH) + 32 x 10/100/1000 (PoE+) + 6 x Gigabit SFP (uplink) + 2 x 10 Gigabit SFP+ (uplink / stacking) - front to back airflow - rack-mountable - PoH / PoE+ (740 W) (Voltage: AC 120/230 V (50/60 Hz))
Device Type:
- Switch - 48 ports - managed - stackable
Enclosure Type:
- Front to back airflow rack-mountable 1U
Ports:
- 16 x 100/1000/2.5G (PoH) + 32 x 10/100/1000 (PoE+) + 6 x Gigabit SFP (uplink) + 2 x 10 Gigabit SFP+ (uplink / stacking)
Power Over Ethernet (PoE):
Performance:
- Switching capacity (full duplex): 304 Gbps
- Forwarding performance (full duplex): 226 Mbps
- Aggregate stacking bandwidth: 480 Gbps
Capacity:
- Switches in a stack: 12
- MAC addresses: 16384
- VLANs supported: 4095
- PVLANs supported: 32
- STP instances: 254
- ARP entries: 4094
- IPv6 routes: 1000
- IPv4 routes: 1000
- Next hop address: 4094
- Trunk groups: 128
- Ports per trunk group: 16
- Jumbo frame size: 9216
- QoS priority queues per port: 8
- Layer 2 multicast groups: 3072
- Layer 3 multicast groups: 2048
- Port Extenders (PE) per fabric: 36
- Port Extender (PE) cascade depth (units): up to 6
Routing Protocol:
- RIP, RIP-1, RIP-2, IGMPv2, IGMP, static IP routing, IGMPv3, ECMP
Remote Management Protocol:
- SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI, NTP
Authentication Method:
- Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2)
Features:
- Flow control, layer 2 switching, auto-sensing per device, power over Ethernet (PoE), BOOTP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, High Availability, firmware upgradable, SNTP support, DDos attack prevention, Metro Ring Protocol (MRP) support, sFlow, Per-VLAN Spanning Tree (PVST), PIM-SM snooping, Remote Fault Notification (RFN), IP Precedence, SSH support, Jumbo Frames support, MLD snooping, PoE+, Trusted Platform Module (TPM), Per-VLAN Spanning Tree Plus (PVST+), Equal-Cost Multipath (ECMP), Uni-Directional Link Detection (UDLD), IPv4 support, hot swappable dual fans, LLDP support, Link Aggregation Control Protocol (LACP), Management Information Base (MIB), MAC address lockout, Dynamic VLAN Support (GVRP), Class of Service (CoS), Strict Priority (SP), Generic Attribute Registration Protocol (GARP), IGMP proxy, redundant fans, GARP VLAN Registration Protocol (GVRP), Type of Service (ToS), DiffServ Code Point (DSCP) support, hot swappable power supply, OpenFlow support, Extended Fabric, power over HDBaseT (PoH), rate limit, AES encryption, MAC address learning, MAC address authentication, Authentication, Authorization and Accounting (AAA), Static Link Aggregation, VLAN Double Tagging (Q-in-Q), Root Guard, VLAN mirroring, Private VLAN, IGMP fast leave, STP BPDU Guard, MAC based VLAN, loopback detection, Hybrid OpenFlow 1.3, VLAN Tagging, MAC address mapping
Compliant Standards:
- IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.1AX, IEEE 802.1BR, IEEE 802.3bz
Interfaces:
- 16 x 100/1000/2.5G RJ-45 PoH - 15.4 W
- 32 x 10/100/1000 Base-T RJ-45 PoE+
- 6 x Gigabit LAN SFP
- 2 x 10Gbit LAN SFP+
- 1 x management (LAN) RJ-45
- 1 x console (USB) Type C management
- 1 x serial (console) RJ-45 management
- 1 x USB Type A
Power Device:
- Internal power supply - hot-plug
Power Redundancy Scheme:
- 1+1 (with optional power supply)
Compliant Standards:
- Plug and Play, EN 61000-3-2, EN50081-1, ICES-003, EN 61000-3-3, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, EN 61000-4-8, UL 60950-1 Second Edition, WEEE, RoHS, EN 61000-6-3, FCC Part 15 A, CAN/CSA C22.2 No. 60950-1-07, EN 60825-2, IEC 60950-1 Second Edition, VCCI Class A, EN 60950-1:2006, IEC 68-2-6, AS/NZS 55022, IEC 68-2-36, EN 55022/CISPR 22 Class A, IEC 68-2-32
Service & Support:
- Limited warranty - lifetime
Min Operating Temperature:
Max Operating Temperature:
Humidity Range Operating:
No Reviews are available at this time
Roll over main image to zoom in. Click to open expanded view.
