The Microsemi SyncServer S80 is a fully integrated GPS/GLONASS antenna, receiver, NTP server, and PoE interface, that easily integrates into existing PoE infrastructure to immediately be the source of accurate, secure, and reliable time stamps for all network connected devices. Network isolated physical security systems benefit as the ruggedized Stratum 1 network time server is ideal for time-synchronizing IP security cameras, access control devices, and digital/network video recorders. SyncServer S80 is also suitable for synchronizing the time on small enterprise networks.
Microsemi SyncServer S80 - Network time server - GigE
Data Link Protocol:
- Ethernet, Fast Ethernet, Gigabit Ethernet
Network / Transport Protocol:
Remote Management Protocol:
- NTP requests: 500 requests per second
- IPv6 support, IPv4 support, weatherproof, NTP server, NTP time synchronization, Network Timing Protocol (NTP) 3, Network Timing Protocol (NTP) 4, Microsemi NTP Reflector technology
- 1000Base-T (PoE) - RJ-45 - 12.5 W
- Mounting brackets, mounting mast, clamps, nuts, washers
- BSMI, CISPR 24, ICES-003, CSA C22.2, FCC CFR47 Part 15, UL 60950-1, AS/NZS, EN 60950-1 Second Edition, IEC60950-1, EN 55024:2010, EMC 2014/30/EU, LVD 2014/35/EU, RTTE, EN 55032, CISPR 32:2012, ETSI 300 019-2-2, ETSI 300 019-2-1, ETSI 300, EN 300386
Power Over Ethernet (PoE) Supported:
Service & Support:
- Limited warranty - 1 year
Min Operating Temperature:
Max Operating Temperature:
Humidity Range Operating:
- Security hardened
For robust and secure NTP operations, SyncServer S80 is equipped with the Microsemi security-hardened NTP Reflector technology with hardware-based NTP packet processing. Unlike other NTP servers, that use the open-source NTP daemon with its documented vulnerabilities, NTP Reflector also works as a CPU-protecting firewall, with bandwidth filtering and limiting of all non-NTP traffic. NTP packet processing is capable of 500 NTP requests per second, all the while protecting the CPU from excessive NTP request loading, that negatively affects time stamp accuracy, reduces the availability of time stamps, and increases susceptibility to CPU freezing or system reset. NTP Reflector supports the NTP mode 3 client requests for time. All time stamps are accurate to 100 nanoseconds to UTC, keeping network elements precisely synchronized and ensuring high-integrity time stamps for video records and log files.
- Modern reliability
SyncServer S80 represents the advanced in NTP Stratum 1 time server technology. By fully integrating the GPS/GLONASS receiver, antenna, and time server in a single unit, the mean time between failure is long years. Coupled with the GbE network interface, SNMP notifications, DHCP, and IPv4/IPv6 support, a user can expect a long and useful life from SyncServer S80 as the surrounding network environment changes over time.
- Physical security network ready
Whether the physical security network is stationary or moving, SyncServer S80 is ready for plug-and-play delivery of accurate and secure NTP time stamps. Both static and dynamic modes are available to accommodate fixed land-based installations or mobile applications, such as seaborne or land mobile. The PoE interface makes SyncServer S80 ready to plug into the near PoE switch or midspan. A few simple commands are all that are needed to configure SyncServer S80 for set-and-forget NTP network timing services.
No Reviews are available at this time