Based on the Haswell microarchitecture, these Intel processor families bring a whole set of performance boosting features. In addition to the usual boost in frequencies and core numbers, the Intel Xeon E5-1600/2600 V3 families are the first in the industry to support the brand DDR4 memory technology. Moreover, these processors include encryption performance overhead reduction features, and technologies improving run time and migration VM integrity.
Gigabyte R271-Z31 (rev. 100) - Server - rack-mountable - 2U - 1-way - RAM 0 GB - SATA - hot-swap 2.5" - no HDD - AST2500 - GigE, 10 GigE - no OS - monitor: none
- Registered, Load-Reduced DIMM (LRDIMM), 8-channel memory architecture
Controller Interface Type:
Data Link Protocol:
- Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet
Remote Management Protocol:
Remote Management Controller:
- 16 (total) / 16 (free) x hot-swap 2.5"
- 2 (total) / 2 (free) x PCIe 3.0 x8 - low-profile
- 4 (total) / 4 (free) x PCIe 3.0 x16 - low-profile
- 1 (total) / 1 (free) x PCIe 3.0 x16 - low-profile (x8 mode)
- 1 (total) / 1 (free) x M.2 Card
- 2 x LAN (10Gigabit Ethernet) (SFP+) - SFP+
- 2 x USB 3.0
- 1 x VGA
- 1 x serial
- 1 x management (NIC) - RJ-45
- 2 x USB 2.0
- CPU Heatsink, rack rail kit
- AC 120/230 V (50 - 60 Hz)
Operating System / Software
Min Operating Temperature:
Max Operating Temperature:
Humidity Range Operating:
The Intel Xeon E5-1600/2600 V3 families support exclusively the DDR4 technology.
- Memory frequency gets the performance edge
On the previous server platforms from Intel, the maximum supported memory frequency has always been automatically downgraded by design when more DIMMs were being added on a server motherboard. As this trade-off between performance and capacity represents a dilemma to many memory-hungry server applications, Gigabyte offers a unique solution. All the motherboards based on the LGA2011-3 socket support by default a maximum frequency of 2133 MHz in any memory configuration.
- IO Gigabit Ethernet Base-T connectivity
This server motherboard is built with a 10 Gigabit Ethernet controller, providing extra fast nominal data transfer rates. Equipped with two BASE-T copper Physical Layer Transceivers (PHY), this board can be used for simple and affordable transitions to 10 Gigabit networks as it is compatible with legacy GbE switches and Cat 6A cable.
- Easy BIOS update
Because updating the version of a BIOS can be a troublesome experience, GIGABYTE has developed this integrated function (no utility to install) that lets you update the BIOS of your motherboard(s): without having to install CPUs, memory, drives, operating system, etc.; without having to power on the system (but a power supply must be connected); one board at a time via the IPMI 2.0 web interface; multiple boards simultaneously via command line.
- IPMI 2.0 web interface remote board management
This motherboard has an onboard controller providing comprehensive remote board monitoring and management features, such as: Remote Boot & Reset Remote Image Mounting; Full Control Over Network, Users, Services and others; Complete System Monitoring & Diagnostics.
- All IR power design
The board's CPU and memory power delivery is ensured by industry-leading IR Digital PWM and IR PowlRstage 1C controllers. These components guarantee a super stable operating environment and allow the processors and the memory to deliver their maximum performance.
- OS-con capacitors
With a service life of a minimum of 50'000 hours, the boards are built with ultra-long lasting components for the highest reliability possible.
- High end ferrite core chokes
The top quality chokes Gigabyte installs on the boards also contribute to an ultra-stable power delivery to the CPU and the memory.
No Reviews are available at this time