This smart hardwire display kit is a 9.8 foot cable to make your life easier when hardwiring your dash cam to your car with the LCD display of the voltage and voltage settings. This kit will prevent the battery from being depleted when the dash cam is hardwired to the car.
GEKO SHWC - Power supply - 2 A - 2 output connectors (Micro-USB Type B, mini-USB Type B) - for Orbit 110, 510, 530, 930, 950, 960
General
Power Device
Output connectors:
- Total 2: 5 pin Micro-USB Type B, mini-USB Type B
Features:
- LCD display, circuit protection, low voltage protection, over-temperature protection, short circuit protection, overcurrent protection
Miscellaneous
Compatibility Information
Designed For:
- GEKO Orbit 110, 510, 530, 930, 950, 960
- Low voltage protection
If low voltage is detected and exceeds 6 minutes lower than set gear, power will immediately be cut off to save the battery. - Mini and micro usb accepted
The Smart Hardwire Kit is compatible with both cables. - Safety circuit protection
Short circuit, over current, over temperature, reverse connection protection. If the voltage rises above the low voltage setting gear range within 6 minutes (if set to 11.9V), it will not enter the low voltage protection and can continue to work; if the voltage exceeds 6 minutes remain low voltage at the set the gear range (if set to 11.9V), the low voltage protection will cut off the power supply and protect your car battery.
